Category Name - Battery Care27 Dec 2016
Checking Your Car Battery Levels
A battery is the heart and soul of your car and knowledge is power when it comes to the maintenance of your car battery. That is because the very thought of being stranded on an unknown road or location due to a dysfunctional battery is quite unnerving. There are a few things which need to be checked from time to time to ensure smooth functioning, as well as the longevity of your car battery life.
Checking the water levels of the battery is one of the primary practices which one needs to undertake for the battery to perform its best. There are two important reasons behind this:
- The water from the batteries evaporate naturally.
- A portion of the liquid amount electrolyzes into oxygen and hydrogen every time the battery is charged.
Learning how to check water levels in the battery while replacing it safely, is an important aspect of any car battery maintenance. Here is a simple to-do list that you can follow while checking the water levels of your car battery.
- Clean the battery: This is an important step before you go on with the actual procedure. You need to clean any dirt or debris that has accumulated on the top or around the battery terminals. This is necessary because you don't want any foreign materials entering the battery cells when you open them.
- Compare the fluid levels in each cell: Look down into each port of the battery and compare the electrolyte levels in them. Each cell is supposed to be covered with equal amount of fluid.
- Recognize when the electrolyte levels are low: You will be able to tell when the level is too low if part of the plates are exposed in the air. If the plates are not completely filled with electrolytes, then the battery will not be able to perform at its optimal best.
- Fill the cells with distilled water: You can fill the gaps in the cells by filling it in with distilled water with the help of a funnel to ensure there is accuracy in the water levels of the battery.
Why distilled water for car battery?
Just filling the gap of the cells with water is not enough. You need to ensure that the water is clean and distilled. The reason for such precaution is listed below:
- Using any water for car battery other than distilled water will introduce minerals, chemicals and other contaminates that will decrease the life of the battery.
- Filtering the tap water will only remove the suspended matter and not the dissolved minerals in the water.
- It is advisable to use distilled water for car battery as it contains no dissolved minerals, salts, organic and inorganic compounds which can harm the battery in the long run.
For more tips on how to care for your battery, you can visit the Battery Care section on the Exide Care website.
You must take ample care of your battery to ensure that it functions smoothly over time without giving you much trouble. It is always wise to take precautions earlier to avoid inconvenience. Nurture your battery and it will surely give you the best results!